Open Access. Powered by Scholars. Published by Universities.®

Computational Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 4 of 4

Full-Text Articles in Computational Engineering

A Combined Quadtree/Delaunay Method For 2d Mesh Generation, Simon Tang Jan 2012

A Combined Quadtree/Delaunay Method For 2d Mesh Generation, Simon Tang

Masters Theses 1911 - February 2014

Unstructured simplicial mesh is an integral and critical part of many computational electromagnetics methods (CEM) such as the finite element method (FEM) and the boundary element method (BEM). Mesh quality and robustness have direct impact on the success of these CEM methods.

A combined quadtree/Delunay 2D mesh generator, based on the early work of Schroeder (1991, PhD), is presented. The method produces a triangulation that approximates the original geometric model but is also topologically consistent. The key advantages of the method are: (a) its robustness, (b) ability to create a-priori graded meshes, and (c) its guaranteed mesh quality.

The ...


High Speed Flow Simulation In Fuel Injector Nozzles, Sukanta Rakshit Jan 2012

High Speed Flow Simulation In Fuel Injector Nozzles, Sukanta Rakshit

Masters Theses 1911 - February 2014

Atomization of fuel is essential in controlling combustion inside a direct injection engine. Controlling combustion helps in reducing emissions and boosting efficiency. Cavitation is one of the factors that significantly affect the nature of spray in a combustion chamber. Typical fuel injector nozzles are small and operate at a very high pressure, which limit the study of internal nozzle behavior. The time and length scales further limit the experimental study of a fuel injector nozzle. Simulating cavitation in a fuel injector will help in understanding the phenomenon and will assist in further development.

The construction of any simulation of cavitating ...


Gpu Based Lithography Simulation And Opc, Lokesh Subramany Jan 2011

Gpu Based Lithography Simulation And Opc, Lokesh Subramany

Masters Theses 1911 - February 2014

Optical Proximity Correction (OPC) is a part of a family of techniques called Resolution Enhancement Techniques (RET). These techniques are employed to increase the resolution of a lithography system and improve the quality of the printed pattern. The fidelity of the pattern is degraded due to the disparity between the wavelength of light used in optical lithography, and the required size of printed features. In order to improve the aerial image, the mask is modified. This process is called OPC, OPC is an iterative process where a mask shape is modified to decrease the disparity between the required and printed ...


Analytical Modeling Of Tree Vibration Generated During Cutting Process, Payman Karvanirabori Jan 2009

Analytical Modeling Of Tree Vibration Generated During Cutting Process, Payman Karvanirabori

Masters Theses 1911 - February 2014

There are several ways to cut down a tree. The piece by piece cutting method is studied in this research. By modeling the cutting process into simple dynamic models and obtaining governing equations of motion of tree and cut piece in each model, the forces during cutting process were calculated. The method was then applied to a set of real data and tree vibrations were compared with field measurements. The study is very rare in the case of the variety of the topics it covers from dynamics and mechanics to finite element modeling of a biological system.