Open Access. Powered by Scholars. Published by Universities.®

Computational Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 1 - 4 of 4

Full-Text Articles in Computational Engineering

Underground Environment Aware Mimo Design Using Transmit And Receive Beamforming In Internet Of Underground Things, Abdul Salam Apr 2019

Underground Environment Aware Mimo Design Using Transmit And Receive Beamforming In Internet Of Underground Things, Abdul Salam

Faculty Publications

In underground (UG) multiple-input and multiple-output (MIMO), the transmit beamforming is used to focus energy in the desired direction. There are three different paths in the underground soil medium through which the waves propagates to reach at the receiver. When the UG receiver receives a desired data stream only from the desired path, then the UG MIMO channel becomes three path (lateral, direct, and reflected) interference channel. Accordingly, the capacity region of the UG MIMO three path interference channel and degrees of freedom (multiplexing gain of this MIMO channel requires careful modeling). Therefore, expressions are required derived the degrees of ...


Chip-Off Success Rate Analysis Comparing Temperature And Chip Type, Choli Ence, Joan Runs Through, Gary D. Cantrell Feb 2019

Chip-Off Success Rate Analysis Comparing Temperature And Chip Type, Choli Ence, Joan Runs Through, Gary D. Cantrell

Journal of Digital Forensics, Security and Law

Throughout the digital forensic community, chip-off analysis provides examiners with a technique to obtain a physical acquisition from locked or damaged digital device. Thermal based chip-analysis relies upon the application of heat to remove the flash memory chip from the circuit board. Occasionally, a flash memory chip fails to successfully read despite following similar protocols as other flash memory chips. Previous research found the application of high temperatures increased the number of bit errors present in the flash memory chip. The purpose of this study is to analyze data collected from chip-off analyses to determine if a statistical difference exists ...


Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, Parnian Ghasemi, Shibin Lin, Derrick K. Rollins, R. Christopher Williams Jan 2019

Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, Parnian Ghasemi, Shibin Lin, Derrick K. Rollins, R. Christopher Williams

Chemical and Biological Engineering Publications

Understanding stress-strain behavior of asphalt pavement under repetitive traffic loading is of critical importance to predict pavement performance and service life. For viscoelastic materials, the stress-strain relationship can be represented by the dynamic modulus. The dynamic modulus test in indirect tension mode can be used to measure the modulus of each specific layer of asphalt pavements using representative samples. Dynamic modulus is a function of material properties, loading, and environmental conditions. Developing predictive models for dynamic modulus is efficient and cost effective. This article focuses on developing an accurate Finite Element (FE) model using mixture elastic modulus and asphalt binder ...


Call For Abstracts - Resrb 2019, July 8-9, Wrocław, Poland, Wojciech M. Budzianowski Dec 2018

Call For Abstracts - Resrb 2019, July 8-9, Wrocław, Poland, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.