Open Access. Powered by Scholars. Published by Universities.®

Structural Materials Commons

Open Access. Powered by Scholars. Published by Universities.®

651 Full-Text Articles 1,255 Authors 214,454 Downloads 66 Institutions

All Articles in Structural Materials

Faceted Search

651 full-text articles. Page 1 of 27.

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte 2019 University of Nebraska at Omaha

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte

Theses/Capstones/Creative Projects

In the construction industry, it is the responsibility of the general contractor to take the architect’s ideas and turn it into a real building. Many times this requires ample communication and several drafts. This efficient execution of this process is vital to the completion of a successful project. In this project, I practice this communication process. The challenge presented by the owner is to build an affordable splash pad, and without impacting the construction schedule of the Early Childhood Development Center (ECDC) that is being built on the same property at the same time. This proposal gives the owner ...


Quantifying Bonding Characteristics Between Uhpc And Normal-Strength Concrete For Bridge Deck Application, Sriram Aaleti, Sri Sritharan 2019 University of Alabama - Tuscaloosa

Quantifying Bonding Characteristics Between Uhpc And Normal-Strength Concrete For Bridge Deck Application, Sriram Aaleti, Sri Sritharan

Civil, Construction and Environmental Engineering Publications

Ultrahigh performance concrete (UHPC) is an advanced cementitious material which has excellent mechanical and durability properties, making it appropriate for the rehabilitation of concrete structures. This paper investigates the usage of a thin layer of UHPC overlaying a normal strength concrete (NC) deck. The behavior of the interface connection will have a significant impact on the overall structural and durability performance of the UHPC-NC composite deck system. An integrated experimental and analytical study was conducted to understand the influence of several variables, such as normal concrete strength, interface roughness, and curing condition on the shear transfer behavior across the interface ...


Binary 2d Morphologies Of Polymer Phase Separation: Dataset And Python Toolbox, Viraj Shah, Ameya Joshi, Balaji Sesha Sarath Pokuri, Sambuddha Ghosal, Soumik Sarkar, Baskar Ganapathysubramanian, Chinmay Hegde 2019 Iowa State University

Binary 2d Morphologies Of Polymer Phase Separation: Dataset And Python Toolbox, Viraj Shah, Ameya Joshi, Balaji Sesha Sarath Pokuri, Sambuddha Ghosal, Soumik Sarkar, Baskar Ganapathysubramanian, Chinmay Hegde

Baskar Ganapathysubramanian

Study of the intricate connection between the design of material distributions (also called morphology or microstructure) and the final properties of the material system has been an attractive research theme for material science community. Such analysis provides ability to synthesize the microstructures exhibiting desired properties. This theme encompasses several material systems including porous materials [26], steels and welds [2], composites [14], powder metallurgy [28], 3D printing [22], energy storage devices as batteries [10], and energy converting devices like bulk hetero-junction solar cells [20]. Microstructure-sensitive design has been used to tailor a wide variety of properties including strengths, heat and mass ...


Structural Design Guidelines For Pervious Concrete Pavements, April Smith 2019 University of Arkansas, Fayetteville

Structural Design Guidelines For Pervious Concrete Pavements, April Smith

Civil Engineering Undergraduate Honors Theses

Pervious pavements have gained popularity in recent years as the transportation industry focuses on sustainability and environmental impact. This research investigated the structural design of pervious concrete pavements. There is no standard design method; therefore, the goal was to lessen ambiguity surrounding the use of pervious concrete for pavement structures. By characterization of the rigid pavement design equation from the 1993 AASHTO Structural Design Guide for Design of Pavement Structures through laboratory exploration and review of existing literature, a guide was created to assist engineers in the design of pervious concrete pavements.


Phase Transitions And Their Interaction With Dislocations In Silicon, Valery I. Levitas, Hao Chen, Liming Xiong 2019 Iowa State University

Phase Transitions And Their Interaction With Dislocations In Silicon, Valery I. Levitas, Hao Chen, Liming Xiong

Valery I. Levitas

In this paper, phase transformations (PTs) in silicon were investigated through molecular dynamics (MD) using Tersoff potential. In the first step, simulations of PTs in single crystal silicon under various stress-controlled loading were carried out. Results shows that all instability points under various stress states are described by criteria, which are linear in the space of normal stresses. There is a region in the stress space in which conditions for direct and reverse PTs coincide and a unique homogeneous phase transition (without nucleation) can be realized. Finally, phase transition in bi-crystalline silicon with a dislocation pileup along the grain boundary ...


Quantifying Bonding Characteristics Between Uhpc And Normal-Strength Concrete For Bridge Deck Application, Sriram Aaleti, Sri Sritharan 2019 University of Alabama - Tuscaloosa

Quantifying Bonding Characteristics Between Uhpc And Normal-Strength Concrete For Bridge Deck Application, Sriram Aaleti, Sri Sritharan

Sri Sritharan

Ultrahigh performance concrete (UHPC) is an advanced cementitious material which has excellent mechanical and durability properties, making it appropriate for the rehabilitation of concrete structures. This paper investigates the usage of a thin layer of UHPC overlaying a normal strength concrete (NC) deck. The behavior of the interface connection will have a significant impact on the overall structural and durability performance of the UHPC-NC composite deck system. An integrated experimental and analytical study was conducted to understand the influence of several variables, such as normal concrete strength, interface roughness, and curing condition on the shear transfer behavior across the interface ...


Soft-Matter Damage Detection Systems For Electronics And Structures, Michael D. Bartlett, Eric J. Markvicka, Ravi Tutika, Carmel Majidi 2019 Iowa State University

Soft-Matter Damage Detection Systems For Electronics And Structures, Michael D. Bartlett, Eric J. Markvicka, Ravi Tutika, Carmel Majidi

Materials Science and Engineering Publications

Soft-matter technologies are essential for emerging applications in wearable computing, human-machine interaction, and soft robotics. However, as these technologies gain adoption in society and interact with unstructured environments, material and structure damage becomes inevitable. Here, we present a robotic material that mimics soft tissues found in biological systems to identify, compute, and respond to damage. This system is composed of liquid metal droplets dispersed in soft elastomers that rupture when damaged, creating electrically conductive pathways that are identified with a soft active-matrix grid. This presents new opportunities to autonomously identify damage, calculate severity, and respond to prevent failure within robotic ...


Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai 2019 Purdue University Northwest

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the ...


Design Of A Carburizing Treatment Of Steel Base Gear In The Materials Science Course, Jiliang Li, Jin Xu, Nuri Zeytinoglu, Jinyuan Zhai 2019 Purdue University Northwest

Design Of A Carburizing Treatment Of Steel Base Gear In The Materials Science Course, Jiliang Li, Jin Xu, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Diffusion PDE Application to Carburizing Treatment of Steel Base Gear

An introductory materials-science course is required in the mechanical engineering curriculum of many universities. This article describes an example effort to incorporate programming, diffusion transfer, heat treatment process and mechanical-property determination as an integral part of the materials-science course instruction. This effort was undertaken in order to give students additional experience in Fick’s 1st and 2nd laws and in-depth understanding of physics and mathematics involved in diffusion analysis. We chose to focus on Fick’s second law because its applications are not restricted to the materials-science field ...


Latex Modified Concrete - Very Early Strength, Bobby Steele 2019 Purdue University

Latex Modified Concrete - Very Early Strength, Bobby Steele

Purdue Road School

INDOT came out with specifications for a very early strength concrete to use on bridge deck overlays. This concrete is fast setting, which allows overlays to be performed over a weekend and benefits the traveling public with a short duration of traffic interference. Cure time to reach the strength requirement is 3 hours. E&B Paving performed the first application with the new spec on August 26, 2018. Many changes were also made to the INDOT Specification Section 722.


Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew McKenna, David Woodward 2019 Technological University Dublin

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for ...


Reactive Ion Etching Selectivity Of Si/Sio2: Comparing Of Two fluorocarbon Gases Chf3 And Cf4, Meiyue Zhang, Pat Watson 2019 Singh Center for Nanotechnology

Reactive Ion Etching Selectivity Of Si/Sio2: Comparing Of Two fluorocarbon Gases Chf3 And Cf4, Meiyue Zhang, Pat Watson

Protocols and Reports

Two reactive ion etching (RIE) processes were studied to show the relative etch selectivity between SiO2 and Si using two fluorocarbon gases, CF4 and CHF3. Results show that CHF3 gives better selectivity (16:1) over CF4 (1.2 :1). On the other hand, the etch rate of SiO2 of CF4 is approximately 52.8 nm/min, faster than CHF3 (32.4 nm/min).


Binary 2d Morphologies Of Polymer Phase Separation: Dataset And Python Toolbox, Viraj Shah, Ameya Joshi, Balaji Sesha Sarath Pokuri, Sambuddha Ghosal, Soumik Sarkar, Baskar Ganapathysubramanian, Chinmay Hegde 2019 Iowa State University

Binary 2d Morphologies Of Polymer Phase Separation: Dataset And Python Toolbox, Viraj Shah, Ameya Joshi, Balaji Sesha Sarath Pokuri, Sambuddha Ghosal, Soumik Sarkar, Baskar Ganapathysubramanian, Chinmay Hegde

Mechanical Engineering Publications

Study of the intricate connection between the design of material distributions (also called morphology or microstructure) and the final properties of the material system has been an attractive research theme for material science community. Such analysis provides ability to synthesize the microstructures exhibiting desired properties. This theme encompasses several material systems including porous materials [26], steels and welds [2], composites [14], powder metallurgy [28], 3D printing [22], energy storage devices as batteries [10], and energy converting devices like bulk hetero-junction solar cells [20]. Microstructure-sensitive design has been used to tailor a wide variety of properties including strengths, heat and mass ...


On The Role Of Composition And Processing Parameters On The Microstructure Evolution Of Ti-Xmo Alloys, Michael Y. Mendoza, Peyman Samimi, David A. Brice, Iman Ghamarian, Matt Rolchigo, Richard Lesar, Peter Collins 2019 Iowa State University

On The Role Of Composition And Processing Parameters On The Microstructure Evolution Of Ti-Xmo Alloys, Michael Y. Mendoza, Peyman Samimi, David A. Brice, Iman Ghamarian, Matt Rolchigo, Richard Lesar, Peter Collins

Materials Science and Engineering Publications

Laser Engineered Net Shaping (LENS™) was used to produce a compositionally graded Ti-xMo (0 ≤ x ≤ 12 wt %) specimen and nine Ti-15Mo (fixed composition) specimens at different energy densities to understand the composition–processing–microstructure relationships operating using additive manufacturing. The gradient was used to evaluate the effect of composition on the prior-beta grain size. The specimens deposited using different energy densities were used to assess the processing parameters influence the microstructure evolutions. The gradient specimen did not show beta grain size reduction with the Mo content. The analysis from the perspective of the two grain refinement mechanisms based on a ...


Magneto-Active Slosh Control System Using Free Floating Membrane For Cylinderical Propellant Tanks Read More: Https://arc.aiaa.org/Doi/Abs/10.2514/6.2019-2177, Pedro Llanos 2019 Embry-Riddle Aeronautical University - Daytona Beach

Magneto-Active Slosh Control System Using Free Floating Membrane For Cylinderical Propellant Tanks Read More: Https://arc.aiaa.org/Doi/Abs/10.2514/6.2019-2177, Pedro Llanos

Pedro J. Llanos (www.AstronauticsLlanos.com)

The phenomenon of sloshing is a substantial challenge in propellant management, particularly in reduced gravity where surface tension-driven flows result in large slosh amplitudes and relatively long decay time scales. Propellant Management Devices (PMDs) such as the rigid baffles and elastomeric membranes are often employed to counteract motion of the free surface. In the present study, we investigate an active PMD that utilizes a free-floating membrane that, under an applied static magnetic field, becomes rigid and suppresses slosh. This semi-rigid structural layer can thereby replace bulky baffle structures and reduce the overall weight of the tank. In this paper, the ...


Experimental And Numerical Simulation Of Split Hopkinson Pressure Bar Test On Borosilicate Glass, Mayank K. Bagaria 2019 Michigan Technological University

Experimental And Numerical Simulation Of Split Hopkinson Pressure Bar Test On Borosilicate Glass, Mayank K. Bagaria

Dissertations, Master's Theses and Master's Reports

This study is an extension to the design of ceramic materials component exposed to bullet impact. Owing to the brittle nature of ceramics upon bullet impact, shattered pieces behave as pellets flying with different velocities and directions, damaging surrounding components. Testing to study the behavior of ceramics under ballistic impact can be cumbersome and expensive. Modeling the set-up through Finite Element Analysis (FEA) makes it economical and easy to optimize. However, appropriately incorporating the material in modeling makes laboratory testing essential. Previous efforts have concentrated on simulating crack pattern developed during 0.22 caliber pellet impact on Borosilicate glass. A ...


Benefits Of Aluminum: Comparing The Common Materials In The Bar Grating Industry, Joanthan Geiser 2019 The University of Akron

Benefits Of Aluminum: Comparing The Common Materials In The Bar Grating Industry, Joanthan Geiser

Williams Honors College, Honors Research Projects

The main aim of this project is to study the wholistic behavior of the 6xxx series of aluminum for use in the bar grating industry for a waste water treatment environment. This project will study the comparison of certain aluminum 6xxx series alloys to steel, stainless steel, and glass fiber-reinforced plastic. While comparing these materials, it will look at the mechanical properties such as modulus of elasticity, yield strength, and ultimate tensile strength. In addition, the available corrosion test of the 6xxx series aluminum alloys will be examined to find a generalization of the corrosion behavior for this series. A ...


Stair Climbing Hand Truck, James McPherson 2019 Central Washington University

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The ...


Autojack - Hydraulic Powertrain System, Tyce Vu 2019 Central Washington University

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved ...


3d Textile Preforms And Composites For Aircraft Strcutures: A Review, Abbasali Saboktakin 2019 University of sistan and baluchestan, Zahedan, Iran

3d Textile Preforms And Composites For Aircraft Strcutures: A Review, Abbasali Saboktakin

International Journal of Aviation, Aeronautics, and Aerospace

Over the last decades, the development of 3D textile composites has been driven the structures developed to overcome disadvantages of 2D laminates such as the needs of reducing fabrication cost, increasing through-thickness mechanical properties, and improving impact damage tolerance. 3D woven, stitched, knitted and braided preforms have been used as composites reinforcement for these types of composites. In this paper, advantages and disadvantages of each of them have been comprehensively discussed. The fabric architects and their specification in particular stitched preforms and their deformation mode for aerospace applications have been reviewed. Exact insight into various types of damage in textile ...


Digital Commons powered by bepress