# Dynamics and Dynamical Systems Commons™

## All Articles in Dynamics and Dynamical Systems

153 full-text articles. Page 1 of 7.

Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, 2019 Iowa State University

#### Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, Parnian Ghasemi, Shibin Lin, Derrick K. Rollins, R. Christopher Williams

##### Derrick K Rollins, Sr.

Understanding stress-strain behavior of asphalt pavement under repetitive traffic loading is of critical importance to predict pavement performance and service life. For viscoelastic materials, the stress-strain relationship can be represented by the dynamic modulus. The dynamic modulus test in indirect tension mode can be used to measure the modulus of each specific layer of asphalt pavements using representative samples. Dynamic modulus is a function of material properties, loading, and environmental conditions. Developing predictive models for dynamic modulus is efficient and cost effective. This article focuses on developing an accurate Finite Element (FE) model using mixture elastic modulus and asphalt binder ...

Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, 2019 Iowa State University

#### Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, Parnian Ghasemi, Shibin Lin, Derrick K. Rollins, R. Christopher Williams

##### R. Christopher Williams

Understanding stress-strain behavior of asphalt pavement under repetitive traffic loading is of critical importance to predict pavement performance and service life. For viscoelastic materials, the stress-strain relationship can be represented by the dynamic modulus. The dynamic modulus test in indirect tension mode can be used to measure the modulus of each specific layer of asphalt pavements using representative samples. Dynamic modulus is a function of material properties, loading, and environmental conditions. Developing predictive models for dynamic modulus is efficient and cost effective. This article focuses on developing an accurate Finite Element (FE) model using mixture elastic modulus and asphalt binder ...

2019 University of Arkansas, Fayetteville

#### Predicting The Mechanical Properties Of Nanocomposites Reinforced With 1-D, 2-D And 3-D Nanomaterials, Scott Edward Muller

##### Theses and Dissertations

Materials with features at the nanoscale can provide unique mechanical properties and increased functionality when included as part of a nanocomposite. This dissertation utilizes computational methods at multiple scales, including molecular dynamics (MD) and density functional theory (DFT), and the coupled atomistic and discrete dislocation multiscale method (CADD), to predict the mechanical properties of nanocomposites possessing nanomaterials that are either 1-D (carbyne chains), 2-D (graphene sheets), or 3-D (Al/amorphous-Si core-shell nanorod).

The MD method is used to model Ni-graphene nanocomposites. The strength of a Ni-graphene nanocomposite is found to improve by increasing the gap between the graphene sheet and ...

A Lagrangian Probability-Density-Function Model For Collisional Turbulent Fluid–Particle Flows, 2019 Sorbonne Universite and Universita di Pisa

#### A Lagrangian Probability-Density-Function Model For Collisional Turbulent Fluid–Particle Flows, Alessio Innocenti, Rodney O. Fox, Maria Vittoria Salvetti, Sergio Chibbaro

##### Chemical and Biological Engineering Publications

Inertial particles in turbulent flows are characterised by preferential concentration and segregation and, at sufficient mass loading, dense particle clusters may spontaneously arise due to momentum coupling between the phases. These clusters, in turn, can generate and sustain turbulence in the fluid phase, which we refer to as cluster-induced turbulence (CIT). In the present work, we tackle the problem of developing a framework for the stochastic modelling of moderately dense particle-laden flows, based on a Lagrangian probability-density-function formalism. This framework includes the Eulerian approach, and hence can be useful also for the development of two-fluid models. A rigorous formalism and ...

Bouncing Dynamics Of A Class Of Mem/Nem Switching Systems, 2019 The University of Western Ontario

#### Bouncing Dynamics Of A Class Of Mem/Nem Switching Systems, Mohamed Bognash

##### Electronic Thesis and Dissertation Repository

The aim of the present research is to understand the bouncing dynamic behavior of NEM/MEM switches in order to improve the switch performance and reliability. It is well known that the bouncing can dramatically degrade the switch performance and life; hence, in the present study, bouncing dynamics of a cantilever-based NME/MEM switch has been studied in detail. To this end, a model of a MEM switch that incorporates electrostatic force, squeeze film air damping force as well as asperity-based contact force has been proposed for an electrostatically actuated switch. An actuation force due to piezoelectric effects is further ...

Shape-Design For Stabilizing Micro-Particles In Inertial Microfluidic Flows, 2019 Iowa State University

#### Shape-Design For Stabilizing Micro-Particles In Inertial Microfluidic Flows, Aditya Kommajosula, Daniel Stoecklein, Dino Di Carlo, Baskar Ganapathysubramanian

##### Mechanical Engineering Publications

Design of microparticles which stabilize at the centerline of a channel flow when part of a dilute suspension is examined numerically for moderate Reynolds numbers (10≤Re≤80). Stability metrics for particles with arbitrary shapes are formulated based on linear-stability theory. Particle shape is parametrized by a compact, Non-Uniform Rational B-Spline (NURBS)-based representation. Shape-design is posed as an optimization problem and solved using adaptive Bayesian optimization. We focus on designing particles for maximal stability at the channel-centerline robust to perturbations. Our results indicate that centerline-focusing particles are families of characteristic "fish"/"bottle"/"dumbbell"-like shapes, exhibiting fore-aft asymmetry. A ...

Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, 2019 Iowa State University

#### Predicting Dynamic Modulus Of Asphalt Mixture Using Data Obtained From Indirect Tension Mode Of Testing, Parnian Ghasemi, Shibin Lin, Derrick K. Rollins, R. Christopher Williams

##### Chemical and Biological Engineering Publications

Understanding stress-strain behavior of asphalt pavement under repetitive traffic loading is of critical importance to predict pavement performance and service life. For viscoelastic materials, the stress-strain relationship can be represented by the dynamic modulus. The dynamic modulus test in indirect tension mode can be used to measure the modulus of each specific layer of asphalt pavements using representative samples. Dynamic modulus is a function of material properties, loading, and environmental conditions. Developing predictive models for dynamic modulus is efficient and cost effective. This article focuses on developing an accurate Finite Element (FE) model using mixture elastic modulus and asphalt binder ...

Call For Abstracts - Resrb 2019, July 8-9, Wrocław, Poland, 2018 Wojciech Budzianowski Consulting Services

#### Call For Abstracts - Resrb 2019, July 8-9, Wrocław, Poland, Wojciech M. Budzianowski

##### Wojciech Budzianowski

No abstract provided.

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, 2018 Western Kentucky University

#### Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

##### Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric ...

Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, 2018 Old Dominion University

#### Current-Driven Production Of Vortex-Antivortex Pairs In Planar Josephson Junction Arrays And Phase Cracks In Long-Range Order, Francisco Estellés-Duart, Miguel Ortuño, Andrés M. Somoza, Valerii M. Vinokur, Alex Gurevich

##### Physics Faculty Publications

Proliferation of topological defects like vortices and dislocations plays a key role in the physics of systems with long-range order, particularly, superconductivity and superfluidity in thin films, plasticity of solids, and melting of atomic monolayers. Topological defects are characterized by their topological charge reflecting fundamental symmetries and conservation laws of the system. Conservation of topological charge manifests itself in extreme stability of static topological defects because destruction of a single defect requires overcoming a huge energy barrier proportional to the system size. However, the stability of driven topological defects remains largely unexplored. Here we address this issue and investigate numerically ...

Dynamic Behavior Of Granular Earth Materials Subjected To Pressure-Shear Loading, 2018 Marquette University

#### Dynamic Behavior Of Granular Earth Materials Subjected To Pressure-Shear Loading, Jeff Wilson Lajeunesse

##### Dissertations (2009 -)

The dynamic response of granular earth materials such as sand has been of interest for many years. Multiple previous works have explored the shock response of sand in various grain shapes, sizes, and moisture contents, but the response during rapid combined loading has been relatively unexplored. The current study contributes to that lack of data by performing pressure-shear experiments on Oklahoma #1 silica sand, with quasi-smooth grains of 63 - 120 micron diameter and 99.8 wt.% Si02 composition. In these experiments, an oblique flyer plate impacts an equally inclined target, imparting a longitudinal (pressure) and transverse (shear) wave into a ...

Characterization Of A Novel Variable Friction Connection For Semi-Active Cladding System, 2018 Iowa State University

#### Characterization Of A Novel Variable Friction Connection For Semi-Active Cladding System, Yongqiang Gong, Liang Cao, Simon Laflamme, Spencer Quiel, James Ricles, Douglas Taylor

##### Civil, Construction and Environmental Engineering Publications

Cladding systems are conventionally designed to serve architectural purposes and protect occupants from the environment. Some research has been conducted in altering the cladding system in order to provide additional protection against natural and man‐made hazards. The vast majority of these solutions are passive energy dissipators, applicable to the mitigation of single types of hazards. In this paper, we propose a novel semiactive variable friction device that could act as a connector linking a cladding panel to the structural system. Because of its semiactive capabilities, the device, here termed variable friction cladding connection (VFCC), could be utilized to mitigate ...

Study Of Input Space For State Estimation Of High-Rate Dynamics, 2018 Iowa State University

#### Study Of Input Space For State Estimation Of High-Rate Dynamics, Jonathan Hong, Simon Laflamme, Jacob Dodson

##### Civil, Construction and Environmental Engineering Publications

High‐rate dynamic systems are defined as systems being exposed to highly dynamic environments that comprise high‐rate and high‐amplitude events. Examples of such systems include civil structures exposed to blast, space shuttles prone to debris strikes, and aerial vehicles experiencing in‐flight changes. The high‐rate dynamic characteristics of these systems provides several possibilities for state estimators to improve performance, including a high potential to reduce injuries and save lives. In this paper, opportunities and challenges that are specific to state estimation of high‐rate dynamic systems are presented and discussed. It is argued that a possible path ...

Adaptive Observers For Structural Health Monitoring Of High-Rate, Time-Varying Dynamic Systems, 2018 University of Dayton Research Institute

#### Adaptive Observers For Structural Health Monitoring Of High-Rate, Time-Varying Dynamic Systems, B. S. Joyce, J. Hong, J. C. Dodson, J. C. Wolfson, Simon Laflamme

##### Civil, Construction and Environmental Engineering Conference Presentations and Proceedings

Safe and reliable operation of hypersonic aircraft, space structures, advanced weapon systems, and other high-rate dynamic systems depends on advances in state estimators and damage detection algorithms. High-rate dynamic systems have rapidly changing input forces, rate-dependent and time-varying structural parameters, and uncertainties in material and structural properties. While current structural health monitoring (SHM) techniques can assess damage on the order of seconds to minutes, complex high-rate structures require SHM methods that detect, locate, and quantify damage or changes in the structure’s configuration on the microsecond timescale.

This paper discusses the importance of microsecond structural health monitoring (μSHM) and some ...

2018 Florida International University

#### A Dynamical System Approach For Resource-Constrained Mobile Robotics, Tauhidul Alam

##### FIU Electronic Theses and Dissertations

The revolution of autonomous vehicles has led to the development of robots with abundant sensors, actuators with many degrees of freedom, high-performance computing capabilities, and high-speed communication devices. These robots use a large volume of information from sensors to solve diverse problems. However, this usually leads to a significant modeling burden as well as excessive cost and computational requirements. Furthermore, in some scenarios, sophisticated sensors may not work precisely, the real-time processing power of a robot may be inadequate, the communication among robots may be impeded by natural or adversarial conditions, or the actuation control in a robot may be ...

Robust Variable Input Observer For Structural Health Monitoring Of Systems Experiencing Harsh Extreme Environments, 2018 Iowa State University

#### Robust Variable Input Observer For Structural Health Monitoring Of Systems Experiencing Harsh Extreme Environments, Jonathan Hong, Liang Cao, Simon Laflamme, Jacob Dodson

##### Simon Laflamme

Systems experiencing events in the order of 10μs-10ms timescales, for instance highrate dynamics or harsh extreme environments, may encounter rapid damaging effects. If the structural health of such systems could be accurately estimated in a timely manner, preventative measures could be employed to minimize adverse effects. Previously, a Variable Input Observer (VIO) coupled with a neuro-observer was proposed by the authors as a potential solution in monitoring their structural health. The objective of the VIO is to provide state estimation based on an optimal input space allowed to vary as a function of time. The VIO incorporates the use of ...

Variable Input Observer For State Estimation Of High-Rate Dynamics, 2018 Iowa State University

#### Variable Input Observer For State Estimation Of High-Rate Dynamics, Jonathan Hong, Liang Cao, Simon Laflamme, Jacob Dodson

##### Simon Laflamme

High-rate systems operating in the 10 μs to 10 ms timescale are likely to experience damaging effects due to rapid environmental changes (e.g., turbulence, ballistic impact). Some of these systems could benefit from real-time state estimation to enable their full potential. Examples of such systems include blast mitigation strategies, automotive airbag technologies, and hypersonic vehicles. Particular challenges in high-rate state estimation include: 1) complex time varying nonlinearities of system (e.g. noise, uncertainty, and disturbance); 2) rapid environmental changes; 3) requirement of high convergence rate. Here, we propose using a Variable Input Observer (VIO) concept to vary the input ...

Microsecond State Monitoring Of Nonlinear Time-Varying Dynamic Systems, 2018 Air Force Research Laboratory

#### Microsecond State Monitoring Of Nonlinear Time-Varying Dynamic Systems, Jacob Dodson, Bryan Joyce, Simon Laflamme, Janet Wolfson

##### Simon Laflamme

Reliable operation of next generation high-speed complex structures (e.g. hypersonic air vehicles, space structures, and weapons) relies on the development of microsecond structural health monitoring (μSHM) systems. High amplitude impacts may damage or alter the structure, and therefore change the underlying system configuration and the dynamic response of these systems. While state-of-the-art structural health monitoring (SHM) systems can measure structures which change on the order of seconds to minutes, there are no real-time methods for detection and characterization of damage in the microsecond timescales.

This paper presents preliminary analysis addressing the need for microsecond detection of state and parameter ...

Adaptive Structural Control Using Dynamic Hyperspace, 2018 Iowa State University

#### Adaptive Structural Control Using Dynamic Hyperspace, Simon Laflamme

##### Simon Laflamme

The design of closed-loop structural control systems necessitates a certain level of robustness to cope with system uncertainties. Neurocontrollers, a type of adaptive control system, have been proposed to cope with those uncertainties. However, the performance of neural networks can be substantially influenced by the choice of the input space, or the hyperspace in which the representation lies. For instance, input selection may influence computation time, adaptation speed, effects of the curse of dimensionality, understanding of the representation, and model complexity. Input space selection is often overlooked in literature, and inputs are traditionally determined offline for an optimized performance of ...

Simulation Of Gas Dynamic Cold Spray Process, 2018 South Dakota State University

#### Simulation Of Gas Dynamic Cold Spray Process, Sai Rajkumar Vadla

##### Electronic Theses and Dissertations

The utilization of computational fluid dynamics (CFD) as a study tool in the aerodynamics and turbomachinery industry reinforces efficiency in the design of aircraft or for understanding the flow through pipes. CFD offer tools to model different geometries and perform a more extensive study of the flow phenomena. This gives the opportunity to model a variety of geometries and analyze their behavior under different operating conditions. A similar approach can be applied to coating technologies. Coating technologies play an essential role in the manufacturing industry. Their ability to form layers of specific materials onto engineering components to enhance mechanical and ...