Open Access. Powered by Scholars. Published by Universities.®

Construction Engineering and Management Commons

Open Access. Powered by Scholars. Published by Universities.®

2,152 Full-Text Articles 2,058 Authors 696,557 Downloads 84 Institutions

All Articles in Construction Engineering and Management

Faceted Search

2,152 full-text articles. Page 1 of 66.

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte 2019 University of Nebraska at Omaha

Mandela Splash Pad Pre-Construction Plan, Levi Sandbulte

Theses/Capstones/Creative Projects

In the construction industry, it is the responsibility of the general contractor to take the architect’s ideas and turn it into a real building. Many times this requires ample communication and several drafts. This efficient execution of this process is vital to the completion of a successful project. In this project, I practice this communication process. The challenge presented by the owner is to build an affordable splash pad, and without impacting the construction schedule of the Early Childhood Development Center (ECDC) that is being built on the same property at the same time. This proposal gives the owner ...


Housing Recovery Through Social Capital: Puerto Rico After Hurricane Maria, Jessica Talbot, Cristina Poleacovschi, Sara Hamideh, Carlos S. Rivera 2019 Iowa State University

Housing Recovery Through Social Capital: Puerto Rico After Hurricane Maria, Jessica Talbot, Cristina Poleacovschi, Sara Hamideh, Carlos S. Rivera

Sara Hamideh

Puerto Rico was devastated by Hurricane Maria on September 20, 2017. Due to a delayed and insufficient official response from the local and federal governments and other aid agencies, the effects are still crippling more than a year after the event. When official response networks failed, communities often engaged in informal reconstruction processes to facilitate their recovery. This research seeks to explain why certain communities were effective in reconstructing on their own and uses social capital theory as the theoretical framework. This study was conducted in four municipalities in Puerto Rico (Adjuntas, Barranquitas, Loíza, and Utuado). A mixed methods approach ...


Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry McAuley, Avril Behan 2019 Technological University Dublin

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite ...


Competitive Strategies In Small And Medium Sized Enterprises (Sme's): A Cross- Case Analysis Of Irish Construction Professional Service Firms, Oluwasegun O. Seriki, Roisin Murphy 2019 Technological University Dublin

Competitive Strategies In Small And Medium Sized Enterprises (Sme's): A Cross- Case Analysis Of Irish Construction Professional Service Firms, Oluwasegun O. Seriki, Roisin Murphy

Conference papers

Strategy formulation aims to attain strategic fit between an organisation and its business environment in pursuit of competitive advantage. Although competitive strategy research is long established within industries such as manufacturing, financial services and IT, strategy within construction is still under-investigated by comparison. For construction professional service firms (CPSFs), the dearth of academic inquiry is even more apparent, partly due to the intangible nature of their service offerings, highly customised nature of their services and reliance on intellectual capital. The Irish construction sector is experiencing stable growth since following a prolonged recession, thus understanding the strategy process within professional service ...


Design, Construction, And Preliminary Investigations Of Otta Seal In Iowa, Sharif Y. Gushgari, Yang Zhang, Ali Nahvi, Halil Ceylan, Sunghwan Kim, Ali Arabzadeh, Charles T. Jahren, Charles Øverby 2019 Iowa State University

Design, Construction, And Preliminary Investigations Of Otta Seal In Iowa, Sharif Y. Gushgari, Yang Zhang, Ali Nahvi, Halil Ceylan, Sunghwan Kim, Ali Arabzadeh, Charles T. Jahren, Charles Øverby

Ali Nahvi

Faced with limited financial resources, pavement engineers constantly seek more durable and economical technologies for road preservations and rehabilitations. Consequently, there have been many efforts to study resurfacing strategies, including various types of sealing for local roads. Among different sealing methodologies, Otta seal is a technique that has not yet been sufficiently studied in the U.S.A. For this investigation, the first Otta seal site in the state of Iowa was constructed using a double-layer Otta seal design over 6.4 km of cracked asphalt pavement. Otta seal design and construction details are documented and discussed, and test sections ...


Life Cycle Cost Evaluation Strategy For High Performance Control Systems Under Uncertainties, Laura Micheli, Ling Cao, Simon Laflamme, Alice Alipour 2019 Iowa State University

Life Cycle Cost Evaluation Strategy For High Performance Control Systems Under Uncertainties, Laura Micheli, Ling Cao, Simon Laflamme, Alice Alipour

Simon Laflamme

High-performance control systems (HPCSs), including active, hybrid, and semi-active control strategies, can perform over a wide excitation bandwidth and are therefore good candidates for multi-hazard mitigation. However, the number of HPCS applications in the field is very limited. This is likely due the perceived high costs of installation, maintenance, possible malfunction, and lack of tools to financially justify their implementation. Such financial justifications could be conducted through life cycle cost (LCC) analysis, but would result in a computationally demanding task due to the very large number of simulations required given the large number of uncertainties. In this paper, two sets ...


Towards A Theoretical Explanation Of How Pavement Condition Index Deteriorates Over Time, Edgar Daniel Rodriguez Velasquez, Carlos M. Chang Albitres, Vladik Kreinovich 2019 University of Texas at El Paso

Towards A Theoretical Explanation Of How Pavement Condition Index Deteriorates Over Time, Edgar Daniel Rodriguez Velasquez, Carlos M. Chang Albitres, Vladik Kreinovich

Departmental Technical Reports (CS)

To predict how the Pavement Condition Index will change over time, practitioners use a complex empirical formula derived in the 1980s. In this paper, we provide a possible theoretical explanation for this formula, an explanation based on general ideas of invariance. In general, the existence of a theoretical explanation makes a formula more reliable; thus, we hope that our explanation will make predictions of road quality more reliable.


Use Of Automated Machine Guidance Within The Transportation Industry, David J. White, Charles T. Jahren, Pavana Vennapusa, Caroline Westort, Ahmad A. Alhasan, Yelda Turkan, Fangyu Guo, John Hannon, Adam Dubree, Tulio Sulbaran 2019 Iowa State University

Use Of Automated Machine Guidance Within The Transportation Industry, David J. White, Charles T. Jahren, Pavana Vennapusa, Caroline Westort, Ahmad A. Alhasan, Yelda Turkan, Fangyu Guo, John Hannon, Adam Dubree, Tulio Sulbaran

Caroline Westort

Automated machine guidance (AMG) links sophisticated design software with construction equipment to direct the operations of construction machinery with a high level of precision, and improve the speed and accuracy of the construction process. AMG technology has the potential to improve the overall quality, safety, and efficiency of transportation project construction. This research project was undertaken to study AMG implementation barriers and develop strategies for effective implementation of AMG technology in construction operations. Early in the research effort, an expert contact group was established to obtain perspectives from agencies, contractors, designers, and equipment manufacturers. An AMG workshop was conducted to ...


Housing Recovery Through Social Capital: Puerto Rico After Hurricane Maria, Jessica Talbot, Cristina Poleacovschi, Sara Hamideh, Carlos S. Rivera 2019 Iowa State University

Housing Recovery Through Social Capital: Puerto Rico After Hurricane Maria, Jessica Talbot, Cristina Poleacovschi, Sara Hamideh, Carlos S. Rivera

Community and Regional Planning Proceedings, Papers, and Posters

Puerto Rico was devastated by Hurricane Maria on September 20, 2017. Due to a delayed and insufficient official response from the local and federal governments and other aid agencies, the effects are still crippling more than a year after the event. When official response networks failed, communities often engaged in informal reconstruction processes to facilitate their recovery. This research seeks to explain why certain communities were effective in reconstructing on their own and uses social capital theory as the theoretical framework. This study was conducted in four municipalities in Puerto Rico (Adjuntas, Barranquitas, Loíza, and Utuado). A mixed methods approach ...


2019 Btes Conference Program Integration + Innovation, Caryn Brause, Peggi Clouston, Naomi Darling 2019 University of Massachusetts Amherst

2019 Btes Conference Program Integration + Innovation, Caryn Brause, Peggi Clouston, Naomi Darling

Building Technology Educator's Society

Following on the alliterative themes of recent BTES conferences, we have selected Integration and Innovation as the theme for the 2019 gathering. Innovation can begin with conjecture, with a searching for more effective solutions, or with an application to currently unknown or unarticulated needs. Innovation scholarship examines the personal intellectual habits that support new ideas, such as openness and exploratory behavior, as well as the circumstances behind the places in which creativity flourishes, such as support for cross-disciplinary fertilization and access to resources. The 2019 BTES conference will explore the role of technology education and curriculum in cultivating these intellectual ...


Design, Construction, And Preliminary Investigations Of Otta Seal In Iowa, Sharif Y. Gushgari, Yang Zhang, Ali Nahvi, Halil Ceylan, Sunghwan Kim, Ali Arabzadeh, Charles T. Jahren, Charles Øverby 2019 Iowa State University

Design, Construction, And Preliminary Investigations Of Otta Seal In Iowa, Sharif Y. Gushgari, Yang Zhang, Ali Nahvi, Halil Ceylan, Sunghwan Kim, Ali Arabzadeh, Charles T. Jahren, Charles Øverby

Civil, Construction and Environmental Engineering Publications

Faced with limited financial resources, pavement engineers constantly seek more durable and economical technologies for road preservations and rehabilitations. Consequently, there have been many efforts to study resurfacing strategies, including various types of sealing for local roads. Among different sealing methodologies, Otta seal is a technique that has not yet been sufficiently studied in the U.S.A. For this investigation, the first Otta seal site in the state of Iowa was constructed using a double-layer Otta seal design over 6.4 km of cracked asphalt pavement. Otta seal design and construction details are documented and discussed, and test sections ...


A Decision-Making Tool For Incorporating Cradle-To-Gate Sustainability Into Pavement Design, Sujata Subedi 2019 Louisiana State University and Agricultural and Mechanical College

A Decision-Making Tool For Incorporating Cradle-To-Gate Sustainability Into Pavement Design, Sujata Subedi

LSU Master's Theses

The need to continually maintain an aged and crumbling national roadway network, together with a growing demand for upgrading has resulted in major environmental and economic impacts around the nation. This has led to an interest in developing a structured framework to quantify the sustainability performance of pavements by balancing economic and environmental performance against engineering criteria. This study developed an Environment Product Declaration (EPD) based, decision-making framework to quantify the sustainability of pavement design alternatives. In this study, the sustainability of pavement is described in tandem with Environmental and Economic performance criteria. First, the Environmental analysis was inclusive of ...


Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler 2019 California Polytechnic State University, San Luis Obispo

Investigation Of Grout - A Comparison Of Standard Grout Mix To Self-Consolidating Grout Mix, Rachel Garcia Chandler

Architectural Engineering

Masonry is a major structural material for low rise buildings, however the design of masonry buildings is rarely taught as a formal course at most universities. As part of the educational experience and to become familiar with the specifications and testing procedures for grouted masonry, a student run experiment on varying the water to cement ratio of masonry grout was conducted. The purpose is to report on the effects of changing the water-to-cement (W/C) ratios in a standard grout mix. The typical W/C ratio is approximately 0.80:1.00. In order to show the effects of increasing ...


Nonlinear Mechanical Properties Of Road Pavements: Geometric Symmetries Explain The Empirical Difference Between Roads Built On Clay Vs. Granular Soils, Afshin Gholamy, Vladik Kreinovich 2019 University of Texas at El Paso

Nonlinear Mechanical Properties Of Road Pavements: Geometric Symmetries Explain The Empirical Difference Between Roads Built On Clay Vs. Granular Soils, Afshin Gholamy, Vladik Kreinovich

Departmental Technical Reports (CS)

It is empirically known that roads built on clay soils have different nonlinear mechanical properties than roads built on granular soils (such as gravel or sand). In this paper, we show that this difficult-to-explain empirical fact can be naturally explained if we analyze the corresponding geometric symmetries.


Exposed! The Impact Of Structural Materiality On The Design Of Architecture, Terri Boake 2019 University of Waterloo

Exposed! The Impact Of Structural Materiality On The Design Of Architecture, Terri Boake

Building Technology Educator's Society

There is a formative connection between structural choice and architectural design. Where the term “low hanging fruit” has often been used with reference to critical first choices towards climate responsive sustainable design, a similar approach can be applied to design-thinking when it comes to structural choices. The consideration of the material nature of the primary structure at the conceptual stage of design can allow for improved focus during the design process. This is particularly critical when working with exposed structural systems as the materiality also directly impacts the aesthetics. Exposing a structure requires that the architect be significantly more technically ...


The Corner: Tectonic Intersections Of The Architectural Environment, Chad Schwartz, Jaasiel Duarte-Terrazas,, Nataani Garnenez 2019 Kansas State University

The Corner: Tectonic Intersections Of The Architectural Environment, Chad Schwartz, Jaasiel Duarte-Terrazas,, Nataani Garnenez

Building Technology Educator's Society

Architectural corners serve as nodes of constructional shifting, of structural logistics, of environmental control emphasis, of spatial experience, and of aesthetic considerations and it is in these particular building intersections that our greatest architects have exceled. Despite the importance of the corner, most architectural software introduces generalizations into design work that all but assures improper understanding of a building’s corners, especially for students and those novice to the profession. The transformations undertaken in the computer rarely reflect the strategies used to create physical, occupiable space. For instance, when working in building information modeling software, walls intersect via “butt” or ...


Intuition Before Integers: Integrating Building Technology Into The Design Studio, James Leach, Kristin Nelson 2019 University of Detroit Mercy

Intuition Before Integers: Integrating Building Technology Into The Design Studio, James Leach, Kristin Nelson

Building Technology Educator's Society

The studio methodology, used almost universally to teach architectural design in the US, embraces speculative investigation and hands-on learning, offering unparalleled opportunities for integrated thinking and open-ended inquiry. Building technology courses, in contrast, tend to be taught in more constrained, and more passive modes - lecture classes, sometimes accompanied by a laboratory or including a project or two. As instructors of both design studios and building technology courses, we have found it difficult to generate the level of engagement and enthusiasm, or achieve the depth of inquiry, in the technology classroom that is common in the design studio. Moreover, we find ...


Design-Build For Discovery: Applied Research On The Construction Site, Mary Hardin 2019 University of Arizona

Design-Build For Discovery: Applied Research On The Construction Site, Mary Hardin

Building Technology Educator's Society

The University of Arizona’s architectural education program utilizes the dual learning vehicles of design-build pedagogy and affordable housing projects to investigate the cost effectiveness of regional vernacular construction methods paired with contemporary energy and water conservation strategies to control initial construction costs and long-term operational costs of single-family dwellings.

Earth, clay and stone, indigenous building materials with long histories in the arid deserts of the southwestern U.S., have diminished in use as labor prices have risen in the construction industry. Over the course of six design-build projects, Building Technology faculty and students experimented with and improved wall forming ...


Big Glue! Testing The Scalability Of Adhesives In Architecture And Design, Emily White, Erik Sapper 2019 California Polytechnic State University, San Luis Obispo

Big Glue! Testing The Scalability Of Adhesives In Architecture And Design, Emily White, Erik Sapper

Building Technology Educator's Society

This paper documents the questions, methods and outcomes of “Big Glue,” a research collaboration among students and faculty from Cal Poly, San Luis Obispo’s chemistry and architecture departments that explores the potentials of structural adhesives in architecture and design. The project asks how adhesives can be more broadly used as work increases in size from the scale of models to full-scale construction.

Our focus is on aluminum structures. We looked at existing adhesive use in construction and in the automotive industry, where adhesives are increasingly used on aluminum and aluminum composites to reduce weight and consequently increase fuel efficiencies ...


Design/Lift: An Extra Concrete Beam In A Park, Federico Garcia Lammers 2019 South Dakota State University

Design/Lift: An Extra Concrete Beam In A Park, Federico Garcia Lammers

Building Technology Educator's Society

According to the Department of Transportation, a commercial truck can drive at a maximum speed of sixty miles per-hour while carrying a sixty-foot-long precast concrete beam on a state highway. The beam in question is headed to a town of 1,800 people to be installed as part of a student-driven, faculty led Public Works project in Webster, South Dakota. Design/Lift focuses on the choreography of lifting and positioning a large piece of concrete on a public site. The beam sits in a yard, unapproved to span highway bridges, but potentially ready to engage the public in unexpected ways ...


Digital Commons powered by bepress